Medicine Bottle # 45; A Turk’s Head Knot Adorns This Bottle Of Liniment.


Medicine Bottle #45; A Turk's Head knot graces this bottle.

Medicine Bottle #45; A Turk's Head knot graces this bottle.

Medicine Bottle #45; A Turk’s Head seems to improve everything — of course this might be the knot version of having the prettiest grandchild in the world. I do have to admit that this bottle didn’t really need the knot. It stands taller than most and is easy to open. I just happened to see it when I had this knot in hand — it seemed a shame to waste it.

The knot on this bottle is:

This is a white paracord Turk’s Head. The count on this knot is 10 Leads X 9 Bights. I couldn’t make this knot as tight as I like to — the bottle is thin walled, and weak in the middle.

The real surprise for me here turned out to be the fact that even though I thought this bottle didn’t need a knot, it was improved by one. But the knot makes the bottle easier to use in some way I can’t figure out. It just makes it feel better in your hand. I’ll have to research this phenomenon and report to the ruling committee at a later time.

Thank you for dropping by my site. As always, I am open to any thoughtful suggestions on how I can improve my site, or my knots. Come back again; the parade of knots marches on:

William

Advertisements

Medicine Bottle # 44; Graced With A Novel Herringbone Knot, With The Bights Worked To Form A Straight Line


Medicine Bottle #44; a straight edged Herringbone knot.

Medicine Bottle #44; a straight edged Herringbone knot.

Medicine Bottle #44; the next piece from the “Medicine Bottle Collection”. I am always trying to learn, or create, different variations for the knots I know, or new knots. Sometimes the variations change a knot so much that it may deserve to be called a new knot. This may be one of those times. What do you think about this?

The knot on this bottle is:

I was using the “Monkey Method” of knot tying, trying for something novel to clap onto a bottle to make it stand out at the Bottle family bedside reunion. I used white paracord because this was for one of the medicines I had to take at 0-dark-thirty. The basic knot is a Herringbone, of 14 Leads X 12 Bights. I worked the rims in the way used on the “Colima Lazy Man’s Knot” in Grant’s book. It not only gave the familiar straight edge, which is the defining characteristic of these knots, but also gave a new alternating short and long pattern where the bights turn back into the knot. I think this makes a very handsome knot.

The straight edges on some knots solve a few of the problems you face when planning/fulfilling a project. You can butt up to a hard structure with minimal gap, either visual or physical. You can also tie two straight-edged knots hard against each other with none of the core showing. This also gives a more even profile to a stack of knots. It is a good thing to have in your kit for those times you need it.

Thank you for coming by my site. Come back again. I do appreciate your visits:

William

Medicine Bottle # 43; A Bi-colored Pineapple Variant Covers Two Inches Of This 4″ Bottle.


Medicine Bottle #43; covered by a bi-colored, 2" long Pineapple knot variation.

Medicine Bottle #43; covered by a bi-colored, 2" long Pineapple knot variation.

Medicine Bottle #43; Back to the more normal prescription medicine bottles. This bottle is about 4″ overall; the knot covers just barely over 2″ of that. This knot didn’t increase the diameter too much, but it did make it much easier to open.

The knot on this bottle is:

This knot has my PPA (Phony Patent Pending) edge treatment. By stopping short of the edge bights of the knot by one crossing, a bolder border is formed. Particularly if two different colored knots abut one another, this makes for a more well-defined edge between them. Besides, this is the look that My Lady Rose likes.

The base knot in this interweave is a Turk’s Head of 13 Leads X 12 Bights, in green and black paracord. I always wondered how one specified the structure of a Herringbone or Pineapple knot. Last year I bought Tom Hall’s excellent work on the Turk’s Head and some of its variants. Now I know that I should give the total counted Leads and Bights, as well as which type of knot it is. As near as I can puzzle out, by his system this knot would be: a Pineapple knot of 2 passes, with an edge type of 2-2, with a total of 23 Leads X 25 Bights.

There is a saying around this part of the country: I don’t know much, and I don’t understand all I know. That about sums up me and my relationship to some of these knots.

If I am just tying whichever knot pops to mind and choosing whether or not to insinuate an interweave with its structure later, I call that “The Monkey Method Of Tying Knots”. I am quite capable of tying a knot which I can only roughly name. Trying to eliminate that hole in my knowledge of knots is taking some work, more work than actually cranking out the knots. I persevere, but progress only slowly — if I were a boat I would be a barge: slow, slab-sided and ungainly, without is own power source or steering gear, blundering along and going as much where the current goes as where I wish.

Thank you for coming by my site. I greatly appreciate your visits. If you have any ideas on how I can improve either my knots, or my site, sing out. That is the only way I will learn, and is the real reason I am here:

William

Medicine Bottle # 42; Almost Completely Covered By Three Gaucho Knots


Medicine Bottle #42; with three Gaucho knots covering all of it.

Medicine Bottle #42; with three Gaucho knots covering all of it.

Medicine Bottle #42: This is a different bottle than the run of the mill prescription bottles you normally see here. The prescription turned out to be a whole bottle. So rather than count out the pills, and then put them in another bottle, she just slapped the labels on the factory bottle. In addition to the savings in labor, it probably saved 4 1/2 pennies for the bottle. These little savings add up and are good for the profit margin, you know.

The knots used on this bottle are, from the top:

The lid got a Spanish Ring knot of 2 passes, in white paracord. This makes the cap bigger around, thus easier to turn. The knot also increases the friction, which also helps. Now if the government’s contract with Lucifer would run out, and it would quit making everyone use these hellish “child resistant caps” … I think it was a deal with the Devil to make more people lose their tempers and curse — possibly even driving them over the edge, so they take out their anger on their fellow man.

The first knot on the body of the bottle is a Gaucho knot of 2 passes. The Tom Hall book tells me I should count all of the Leads and Bights in the finished knot, no matter which knotting method I used to get there — so it has 13 Leads X 11 Bights.

The lower knot is also a Gaucho knot of 2 passes, which counts out to be 9 Leads X 10 Bights.

Why did I use the phrase “no matter which knotting method I used to get there”? I am what you might call an instinctive knot tyer. Most of the time I sit down with a project I’m working on, some cord, and an idea. I very rarely think about the Leads X Bights. Most of the time I think in terms of the width I need to cover, and maybe a particular look. I then tie a knot in hand, and check for fit and appearance. If it looks OK, I work it down tight, and dress the knot. If it doesn’t look right, I start over. Because most of the things I have done are all of the same general dimensions, I usually get it right. The decision to make a Turk’s Head, or some variant, is made on the fly. Mae West used to say that when faced with two temptations she always tried the one she hadn’t experienced before. I tie knots the same way. I will go out of my way to find a new knot, or a new variation on an old knot, rather than getting really good at tying one old same-same knot. What can I say? I have a very low threshold when it comes to boredom.

Thank you for dropping by my site. I look forward to your visits, and to any comments you leave. Come back again; I’ll try to make it worth your while:

William

A Curvy Bottle Covered In Turk’s Head Variants


Turk's Head variants cover a curvy bottle.

Turk's Head variants cover a curvy bottle.

Now this is my kind of bottle, shapely enough to be interesting, and a challenge to clap knots on. In this case, so many knots clapped on that you can hardly see the glass. All knots came out as I intended them to — none of them oozed down a slope to end up in a different place, or crowd the other knots. The only thing lacking is that it isn’t full of home-made scuppernong wine. Of course that fault can be remedied later.

The knots on this bottle are, top to bottom:

Just under the rim at the top is a white Turk’s Head of 3 Leads X 8 Bights.

Next comes a green Herringbone knot of 12 Leads X 14 Bights.

The white ring that comes next is Spanish Ring knot. This one counts out to 5 Leads x 8 Bights.

The first real feature knot is the bi-color Pineapple knot which covers the shoulders of the bottle. The base knot, done in green, has 9 Leads X 8 Bights. The white interweave counts out to 7 Leads X 8 Bights. I have done my usual trick of stopping the interweave one crossing short of where most people take it. My Lady Rose likes a bolder border than the regular knot provides. By tying the knot this way you have three strands of green on the rim of the knot that are not broken up by white strands. This tricks the eye into seeing the green rim as a thicker line, thus the more graphic look that makes her happy. … … All together now … … and when she’s happy, I’m happy.

Just below the bi-color Pineapple knot, and dividing it from the white knot below is a 3 strand grommet. It is made the usual way — by laying up one long strand into a fake 3 strand laid cord. The grommet also does double duty as the carrier for the Sailor’s Knife ¬†Lanyard knot with the ends left long a rough 2 strand tassel. This knot is also known as:

  • the Chinese Button knot.
  • the Bosun’s Whistle knot
  • the Marlingspike Lanyard knot
  • the 2 strand Diamond knot
  • the single strand Diamond knot

and on, and on … this knot must appeal to something deep in the minds of everyone who ties knots to have been reinvented and renamed so many times. I’m sure I have heard it called by other names, and I have seen it tied as a flat 2 strand lanyard knot. I prefer the button version over the flat, but that may just be from more exposure to, and tying of, that version.

The white knot that covers the waist of the bottle is a Turk’s Head of 9 Leads X 8 Bights, done in paracord.

The green ring between the last knot and the next one is a Spanish Ring knot, also in paracord. I guess you would be safe in assuming that most of my knots are tied in paracord; it’s good stuff, and I like good stuff.

The final knot on this bottle is some sort of a bastard love child between a Gaucho knot and the alien being which kidnapped him. They must have performed vile and obscene acts upon him, because it is not the knot I thought I was tying. There is some sort of an irregular mis-step in the interweave, but it is consistent throughout. When I was tying the knot I thought everything was fine — then I looked closely after I was finished. I probably should have just kept my big mouth shut. I suppose I could also have named it and claimed it as the fruit of long years of research and experimentation (in a way it is all that). I just couldn’t bring myself to do either, so I did the only thing I could — tell you the truth, ¬†and let you judge.

That concludes the actual knotting portion of our show. I would now like to turn to our sponsors — the trawl-net full of links page on the upper right. As I said, rather than present you with an all-at-once link page after much labor, I am filling it in as I return to a knot site previously visited (some many times), or a new site I’ve just discovered. I am putting up a link only after I have given the site a personal look-see. My reviews are longer than most link pages because I am trying to give you an honest picture of the site, before you go there. There has already been a surprising level of use; I greatly appreciate your visits. Among other things, they tell me that I am putting up something of use to someone other than myself. Now is your big chance to have input on how those pages grow. Tell me what you like, or don’t like, about them. Tell me which categories you wish to see filled in first. Tell me of any sites, yours or other’s, which you feel should be there. Your wish isn’t my command, but you do have a large amount of influence. I am making this page for you. I’m basically reviewing sites as I happen to go there, either on purpose or just bouncing from knot to knot while following the strands of the void. Your thoughts and ideas are heartily solicited, and will be appreciated.

Thank you for coming by my site. Come back again, and tell your friends about it. The more excited I get by it, the harder I’ll work on it:

William

Medicine Bottle # 41; A Bi-Color Herringbone Knot, A Turk’s Head On The Lid


Medicine Bottle #41; With a bi-color Herringbone knot and 2 Turk's Heads.

Medicine Bottle #41; With a bi-color Herringbone knot and 2 Turk's Heads.

This is the next piece from the “Medicine Bottle Collection”. Though it once held medicine, it is of a different size and shape than most. Its nice to have some change now and then — the spice of life, you know. All this restricted knot tying is hard on someone whose picture is next to “Bored Easily” in the Oxford English Dictionary.

The knots on this bottle are; from the top of the picture — bottom of the bottle:

A Herringbone knot of 2 passes. Each pass is of a different color. I was experimenting with the idea of using a probe to forcefully dress the bights so that they nested tightly within one another. Not a good idea, even where it worked, as it made the knot look odd compared to my mental picture of a proper Herringbone knot.

The thin black ring is made of gutted paracord tied as a 3 Lead X 5 Bight Turk’s Head.

The knot tied around the lid is there primarily to improve the grip. The fact that I also find it to be a handsome improvement is just good karma. The knot is a Turk’s Head of 5 Leads X 9 Bights, raised from a 3 Lead knot.

The larger diameter makes for better leverage, the texture makes for good grip, the looks makes for a more attractive stack of bedside bottles — all in all, a win.

Thank you for dropping by my site. If you can see any improvements I could make to knots or site, sing out. I would greatly appreciate hearing from you. Come back again; the parade of knots is building up to normal speed once more:

William

Medicine Bottle # 40; A Triple Header, A Gaucho Knot, A Herringbone Knot, And A Turk’s Head.


Medicine Bottle #40; covered by three knots. A Gaucho knot, a Herringbone, and a Turk's Head make up the trio.

Medicine Bottle #40; covered by three knots. A Gaucho knot, a Herringbone, and a Turk's Head make up the trio.

Another decade on the count for the “Medicine Bottle Collection”. Forty seemed like a high number when I first typed it, but the reality is that this is a fraction of the bottles since all this started. I don’t recommend it very highly as a hobby — but as long as I have the bottles anyway …

The knots on this bottle are; from the top/left end:

One of my stock knots, a Gaucho knot of 9 Leads X 7 Bights, done in black paracord.

The center knot is a Herringbone knot of 10 Leads X 8 Bights, in green paracord.

The bottom ring is a black Turk’s Head of 3 Leads X 5 Bights.

One thing to keep in mind is that the interweaves are not subject to the common divisor rule that regulates which single strand Turk’s Head knots are possible. As an example; 2 Turk’s Heads of 5 Leads X 4 Bights interwoven to give a Herringbone knot of 10 Leads X 8 Bights. This would be an impossible Turk’s Head to make with a single strand. You can tie this as a “perfect Herringbone knot” using one strand by deflecting into an interweave.

Thank you for coming by my site. Come back again; the parade of knots is marching on:

William