The Walking Stick Memoriam #3; A Pineapple Knot In Two Colors Of Paracord


A bi-color Pineapple knot is next.

A bi-color Pineapple knot is next.

This knot dresses the bottom end of a length of 2 Bight Turk’s Head which was done in an open weave. It is also a remeinder of the time when I was just learning to put interweaves on my Turk’s Head knots. Today I probably wouldn’t leave this knot on a walking stick for the world to see. At the time, it was near the top of my knotting skills. I’m sure if I’m still alive in another 15 years, I’ll say the same about the pictures I’m taking today. Of course, it could be much worse — if you practice a skill for 10 or 15 years and you didn’t get better that would be much worse.

The knot of today’s post is:

This is a bi-colored Pineapple knot. If I remeber correctly, and I wouldn’t bet the farm on it, the base knot in white paracord was of 9 Leads X 8 Bights. The intereave was done with the wider visual border created by stopping the weave one crossing short of the standard Pineapple knot. Using Tom Hall’s nomenclature, as near as I can figure it, this would have a 2–2 structure.

To the right of this knot you can see the start of the next. My Lady Rose likes the look of a more open weave. Both of these knots exhibit this nature, the next more so than this.

Thank you for dropping by my site. If you know of any way by which I could improve either my site, or my knots, sing out. I would like to hear from you. Come back again; I’ll work my way up the walking stick:

William

Published in: on February 10, 2010 at 12:49 AM  Leave a Comment  
Tags: , , ,

Medicine Bottle # 43; A Bi-colored Pineapple Variant Covers Two Inches Of This 4″ Bottle.


Medicine Bottle #43; covered by a bi-colored, 2" long Pineapple knot variation.

Medicine Bottle #43; covered by a bi-colored, 2" long Pineapple knot variation.

Medicine Bottle #43; Back to the more normal prescription medicine bottles. This bottle is about 4″ overall; the knot covers just barely over 2″ of that. This knot didn’t increase the diameter too much, but it did make it much easier to open.

The knot on this bottle is:

This knot has my PPA (Phony Patent Pending) edge treatment. By stopping short of the edge bights of the knot by one crossing, a bolder border is formed. Particularly if two different colored knots abut one another, this makes for a more well-defined edge between them. Besides, this is the look that My Lady Rose likes.

The base knot in this interweave is a Turk’s Head of 13 Leads X 12 Bights, in green and black paracord. I always wondered how one specified the structure of a Herringbone or Pineapple knot. Last year I bought Tom Hall’s excellent work on the Turk’s Head and some of its variants. Now I know that I should give the total counted Leads and Bights, as well as which type of knot it is. As near as I can puzzle out, by his system this knot would be: a Pineapple knot of 2 passes, with an edge type of 2-2, with a total of 23 Leads X 25 Bights.

There is a saying around this part of the country: I don’t know much, and I don’t understand all I know. That about sums up me and my relationship to some of these knots.

If I am just tying whichever knot pops to mind and choosing whether or not to insinuate an interweave with its structure later, I call that “The Monkey Method Of Tying Knots”. I am quite capable of tying a knot which I can only roughly name. Trying to eliminate that hole in my knowledge of knots is taking some work, more work than actually cranking out the knots. I persevere, but progress only slowly — if I were a boat I would be a barge: slow, slab-sided and ungainly, without is own power source or steering gear, blundering along and going as much where the current goes as where I wish.

Thank you for coming by my site. I greatly appreciate your visits. If you have any ideas on how I can improve either my knots, or my site, sing out. That is the only way I will learn, and is the real reason I am here:

William

Medicine Bottle # 38; Another Small Bottle But The Knots Make It Bold. The Bi-Color Pineapple Knot Shines.



Medicine Bottle #38; A Spanish Ring knot and A Bi-color Pineapple Knot Make A Handsome Bottle.

Medicine Bottle #38; A Spanish Ring knot and A Bi-color Pineapple Knot Make A Handsome Bottle.

Medicine Bottle #38; A Spanish Ring knot and A Bi-color Pineapple Knot Make A Handsome Bottle.

Medicine Bottle #38; A Spanish Ring knot and A Bi-color Pineapple Knot Make A Handsome Bottle.

Medicine Bottle #38; A bi-color pineapple interweave makes this a bold looking bottle. Sometime size isn’t everything … of course, at times, size alone wins the day. This bottle allow free choice on your philosophy for the day. This is the next piece from the “Medicine Bottle With Knots Collection”.

The knots used on this bottle are, from the top:

The black ring at the top of the bottle is a Spanish Ring knot, of 2 passes in black paracord. This knot also functions as the carrier for the Sailor’s Knife Lanyard knot, which forms the button. Both ends were left long to act as a rough tassel.

The feature knot on this bottle, and the star by appearance, is the bi-color pineapple interweave. The base knot was a Turk’s Head of 9 Leads X 8 Bights, tied in single strands of white paracord. The pineapple interweave is not the usual item. My Lady Rose like the look of a very defined border at the edge o a complex knot. One way to achieve this is to tie the pineapple interweave so that it stops one crossing/tuck short of where it usually would. This leaves a 3 strand border the color of the base knot. I struggled and puzzled over this at first, partly because of the mechanics of something I had never done, partly because in all the books I read it just wasn’t done. Being a self-directed / independent type guy has its advantages. 28 seconds of stressful worry about tying a knot differently than the wizards say you should almost made that one sip of Cuba Libra taste a little off. Then I tied the knot the way I thought My Lady Rose would like. She was happy — so I was happy — the wizards can fend for themselves, they didn’t get where they are by being delicate of constitution.

I find this knot very handsome. The extra thick borders have grown onto my definition of a good pineapple knot. It helps that it looks fine, and forms an excellent grip.

Thank you for coming by my site. I greatly appreciate your visits and any input you care to give. Come back again; The band is warming up for the parade:

William

A Golf Ball Trapped Inside A Pineapple Knot Woven On An 11 Lead X 10 Bight Base


A Golf Ball Wrapped In A Pineapple Knot.

A Golf Ball Wrapped In A Pineapple Knot.

This is the next piece in the “Ensnared Golf Ball Collection”. If any of you are wondering why I — a never-played-golf-in-my-life type person — has all these golf balls lying around to tie knots on, there is a logical reason. I tie most of my practice knots in hand. That means they end up being in a relatively narrow size range. It depends on how many fingers I use, and how tight I tie the initial knot. That size range just happens to coincide with golf balls and your average hot sauce bottle. I tried saving money by using ping-pong balls, but I crushed them all well before I had the knots worked down tight. So I buy inexpensive practice golf balls — hollow plastic. They are of questionable pedigree and virtue, but seem to stand up to most of my knots. There are occasional crush failures, but not often. The problem is solved, for very little money invested.

And now On With The Show — The knot on this ball is a Pineapple interweave, done on a base Turk’s Head of 11 Leads X 10 Bights. This gives a final count of ??!?? beats me — I think I can maybe count a Herringbone knot with some accuracy. A Pineapple knot — how and what do you count — which Bights — only the base knot? How far in do the Bights on the interweave have to be before they are no longer counted? One tuck, or three, which is too far? I am open to, even asking for, someone who has a system to let me in on the secret handshake and decoder ring stuff.

Like some of my other knots, this one had actually started to make the plastic on the far rim of the knot flow and flex. Discretion being the better part of valor, I stopped cranking down on it and dressed it. If I were an artiste I would say that I let the knot be itself and develop as its inner longings guided it. My brain just doesn’t work that way — I want the demon-ridden things to do as I desire.

If any of you know of any way in which I could improve either my knots or my site, please sing out. If you do not wish to leave a public comment you may use the “Write To Me Directly, Here” link on the upper right of the page. It sends me a private E-Mail, without showing up on the site. I will not post anything from these E-Mails without your express permission.

Thank you for investing the time and effort you put into looking at my site. I greatly appreciate the fact that you do have to make that investment, to come see the parade of knots. I will always try to make it worth your while. Come back again; the latest winter equinox rituals for the Gods Of Knots And Ropes seems to have been successful:

William

Medicine Bottle #29; A Pineapple Knot Tied Over A Mouse Makes It Easier To Open


Medicine Bottle #29; A Pineapple knot improves the grip. 01

Medicine Bottle #29; A Pineapple knot improves the grip. 01

Medicine Bottle #29; A Pineapple knot improves the grip. 02

Medicine Bottle #29; A Pineapple knot improves the grip. 02

This small bottle has one of those demon inhabited opening-resistant caps. The diameter of the Hell blasted thing is just under 1″. The cap is just barely larger — with hands the size of mine it doesn’t work as advertised. When I get a firm enough grip on the bottle to open it, you can only see/touch the cap by looking down into my fist. I could improve this only by throwing it out, or tying knots on it to make up for at least part of its shortcomings. Now let’s see …. William ties knots every day …. he also hates to throw out anything that can be made to work … I wonder, do you think he would tie some knots on this thing and try to bind that demon. Yes Sir, that is just what I did.

The cap was so thin and slick that turning it was a problem. In addition, you had to push down with about 4 pounds of force to unlock the mechanism. When you’ve done that,the problem is holding the bottle firmly enough to resist the applied force levels.

The only way out for me was to tie knots. The knots on this bottle were, from the lid:

The cap/lid was made easier to grip and turn by clapping on a Spanish Ring knot. This increased the diameter and also added a high-friction surface so you could turn it without looking like you were practicing some schtick for a live slapstick  act.

This left you with the problems of the bottle itself. It was way too thin, and way too slick. This led to a 7 Lead X 5 Bight, Turk’s Head knot being conscripted to act as a mouse. Over this went a Turk’s Head knot of 7 Lead X 6 Bight, doubled in white paracord. I then gave it a Pineapple interweave. Because the interweave is a single strand as opposed to the doubled base knot, it has an unusual look. It is however, as far as function goes, an elegant answer to the problem. The moused-out Pineapple knot is just large enough to fill the hollow of my palm so I can hold the bottle tight enough to grasp it with my off hand. Then it is just — squeeze very firmly (note: back off if you hear cracking noises) — make sure enough of the cap is out far enough to push and twist it open.

I can get it open if I’m fully alert and don’t get mistaken for someone trying to do a magic trick. …..Hey, you’re cheating, I can see the bottle!

I will be happy to see this one go, even though it has served its function, and generally kept its mouth shut about the job conditions. It is just that it doesn’t belong to the E-Z-Open class of bottles.

Careful observers can see that the Pineapple knot has distinctly visible undulating ribs. This is in part an artifact induced from the mouse material and the way I worked the knot. When I saw that they wanted to show a slight rib, I coaxed them to go that way …. only someone who has been subjected to greatly coercive treatment like maybe torture …. or a long dragged-out divorce … could understand what I mean when I say coaxed.

This is one bottle that has good knots on it, but one I won’t miss. The underlying bottle with the label which says ” Made in Hades by Mephisto Manufacturing, LTD”. tells me all I need to know.

Thank you for dropping by my site today. I greatly appreciate all visits/comments. Come back and watch me go crazy trying to keep those simple-minded mimes from scaring the kids watching the parade of knots:

William

Hot Sauce Bottle #6; A Larger 12 oz. Bottle Gives More Space For The Covering Of Turk’s Head Variants


Hot Sauce Bottle #6: covered in Turk's Head variants.

Hot Sauce Bottle #6: covered in Turk's Head variants.

Every once in a while I remind myself that my real hobby is tying knots, not taking pictures. This is one of those times. It says right here on the box that you should never visually decapitate your photo subject, and that framing space is important. Yep … that’s true. Unfortunately my camera does not have a time travel function, so this is the shot that will have to do.

The knots on this bottle are, from the top:

The neck of the bottle sports a white Gaucho knot of 2 passes; done in paracord. The finished knot counts out to 13 Leads X 16 Bights.

The next knots are a little confusing — both visually and to try and explain. The lower part of the neck is moused out with a knot tied in 5/16″ utility cord. The Bight count is 10 — the Lead count is mmufmp-mum-murkle. I lost the cheat sheet and forgot the knot. It doesn’t seem to mind, and performs its duty as a mouse without complaint. You can see the top rim of this knot between those that surround it. I do not remember the things that led up to it ending up like this — I’m sure I had some logical sounding ideas at the time — or maybe I meant to cover it up later with another knot and it fell through the cracks.

The next knot covers the moused out portion of the neck and the upper part of the shoulders. The base knot is a Turk’s Head of 9 Leads X 8 Bights, doubled, in black paracord. This knot is one of my standards. The upper portion of this knot has an interweave done in white paracord, also doubled. The top edge would qualify as a Herringbone in a more customary use. The bottom part of the interweave would be called a Pineapple knot in normal usage. What do I call this usage. Beats me … what the canonical nomenclature would be I haven’t got the foggiest notion. Maybe a Herringbone/Pineapple knot? I’ll let you decide based on the description given, and your personal naming system.Under this knot, and the first knot fully on the body of the bottle, is a Spanish Ring knot. It is done in the same 5/16″ utility cord used for the mouse.

The main feature knot on the body is a bi-color Gaucho knot of 2 passes, done in paracord. I have always called this two-toned effect a “Lightning Stroke”. I have lately heard that a Gaucho knot is called a “Lightning Knot” in some parts of Australia. I can not vouch for this, but given that many of the people tying these knots in isolated parts of that country probably didn’t have a copy of Mr. Grant’s book on horse tack and braiding, they could have come up with the name the same way I did.

The black knot on the bottom of the bottle is of 9 Leads X 36 Bights. It is done in an over 2, under 2, weave of black paracord. It is tied in what I have seen called a “W” knot, a 2 pass Gaucho knot, which, when looked at with the knot going around a horizontal cylinder, shows a “W” in the weave pattern. Or I guess more properly 36 “W’s” — one for each Bight.
Thank you for taking the time to view my site. Each visit/comment is greatly appreciated. Sometimes it is nice to know that someone is watching the shadow play that is my blog. Come back again; I’ll try to make it worth your trouble:
William

Hot Sauce Bottle #5; Covered From The Lid Down With Turk’s Head Variants


Hot Sauce Bottle #5; covered in Turk's Head variants.

Hot Sauce Bottle #5; covered in Turk's Head variants.

This is the next piece from the “Hot Sauce Bottle Collection”. It also ended up being one of the bottles which I chose to try new things on. After putting knots on many of its kin, I have to try something new to fight boredom — and to try to improve my skills.

The knots on this bottle are, from the top:

The lid has a black Spanish Ring knot tied with gutted paracord.

The neck of the bottle is covered with a Turk’s Head of 9 Leads X 7 Bights, doubled in white paracord. It is of over 2, under 2, weave.

The green knot just below this is a Turk’s Head of the same count of Leads, Bights, and the same weave — but done with a single strand.

The black knot on the shoulders of the bottle is a Turk’s Head of 9 Leads X 7 Bights, doubled, of over 1,under 1 weave.

The last 3 knots were done to explore variations on a theme. The same count for the Leads & Bights, but still very different visually. The manipulations produced such differences that at first glance they don’t look as if they have anything in common.

The thin white knot below this is a Spanish Ring knot.

The green knot sandwiched between the 2 white ones is another Turk’s Head of 9 Leads X 7 Bights. It was done in a single strand, with an over 2, under 2, weave.

The next knot is a Spanish Ring knot done in white paracord. The reason it looks vastly different from the other Spanish Ring knot is that I started with a 3 Lead Turk’s Head which had a much higher Bight count.

The knot on the bottom of the bottle is the true novelty of this bunch. I started it off with a Turk’s Head of 11 Leads X 10 Bights, done in a single strand of black paracord. I then did a Pineapple interweave but restricted it to the first 3 rings of crossings. There is then an unadorned section of one crossing’s width. In the lowest ring of crossings I did another Pineapple interweave — but only of one ring.

This bottle from top to bottom proved to be a very satisfying exercise in knots. I realize that many people will not think it was worth the trouble for the finished look. To me it is the process as well as the product — both are fulfilling in their own ways. If other people also enjoy the end item, that is just an extra plus.

Thank you for coming by my site. I do greatly appreciate all your visits and any comments you leave. Come back again; the parade of knots goes on:

William

Follow

Get every new post delivered to your Inbox.

Join 29 other followers